Navigate to the Company Name homepage

-
You are here:Home > Color Management > Color Analyzers & Probes
DCAA-CA210 Rental

1 Week Rental of Minolta CA-210 DCAA Kit

$1,495.00
Renter must provide Certificate of Insurance (COI) showing Flanders Scientific as the loss payee and additionally insured.
Product Code: DCAA-CA210.Rental
Schedule rental with support@flandersscientific.com

Description

This is a 1 week rental of the DCAA-CA210 Kit. This item is currently only available for rental in the USA.

Please note that all FSI Monitors come pre-calibrated. This kit is optional and best suited for long term recalibration of multiple units in facilities that own large quantities of FSI monitors and prefer to do recalibration onsite.

This kit consists of a Minolta CA-210 Color Analyzer and FSI's Direct Connect Automatic Alignment (DCAA) adapter allowing users to plug the CA-210 directly into an FSI monitor, no PC required, to perform fully automated white balance calibration. Every DCAA-CA210 Kit is custom calibrated by FSI with monitor model specific offsets using a high quality spectroradiometer to ensure accurate readings across multiple FSI monitor models.

Automatic alignment is as simple as placing the probe in front of the monitor, recalling the proper monitor model offset from the CA-210's memory, plugging the CA-210 body into the monitor with the provided passive adapter, and then selecting 'Start Display Alignment' from the monitor's menu. The rest of the process is entirely automated and takes roughly 25 minutes per monitor to complete.

The DCAA-CA210 Kit provides an unsurpassed balance of simplicity, speed, and accuracy for FSI monitor white balance setup. By utilizing monitor model specific offsets the CA-210 can handle a wide variety of spectral distributions with x,y chromaticity accuracy of +-0.002 for white balance. Moreover, the CA-210 offers instant recall of these various offset files directly from the Display Color Analyzer body unlike many other color analyzers on the market that require a connected computer for offset file programming and selection.

The Minolta CA-210 can also be used with Spectral's CalMAN Studio and LightIllusion's LightSpace CMS (both sold separately) for 3D LUT based calibration.

Features

  • Simple to use direct connect design, no PC required.
  • Instantly recallable spectroradiometer determined offsets for all current FSI monitor models
  • Fast measuring, highly accurate device
  • Complete white balance recalibration in less than 25 minutes per warmed up monitor

Technical Specs

ReceptorSilicon photocell
Measurement areaΦ27mm
Acceptance angle±2.5°; Pointing function: By LED
Measurement distance30±10mm
Display rangeLuminance0.01 to 1000cd/m2
ChromaticityDisplayed in 4- or 3-digit value (selectable)
LuminanceMeasurement range0.10 to 1000cd/m2
Accuracy (for white) *1±2%, ±1 digit of reading (Temperature: 23°C ±2°C; Relative humidity:(40±10)%)
Repeatability (2σ) *10.10 to 0.99cd/m2: 0.2%+1digit; 1.0 to 1000cd/m2: 0.1%+1digit
ChromaticityMeasurement range0.10 to 1000cd/m2
Accuracy *10.10 to 4.99cd/m2: ±0.008 for white
5.00 to 39.99cd/m2: ±0.005 for white
40.00 to 1000 cd/m2: ±0.003 for white
160 cd/m2: ±0.002 for white; ± 0.004 for monochrome *2
Repeatability (2σ) *10.10 to 0.19cd/m2: 0.015
0.20 to 0.49cd/m2: 0.008
0.50 to 1.99cd/m2: 0.003
2.00 to 1000 cd/m2: 0.001
Measurement speed (meas./sec.)xyLv*30.10 to 1.99 cd/m2: 5 (4.5)
4 cd/m2 or greater: 20 (17)
DisplayDigitalxyLv, XYZ, TΔuvLv, u'v'Lv, RGB analyze
AnalogΔxΔyΔLv, R/G B/G ΔG, ΔR B/R G/R
LCD16 characters × 2 lines (with backlight)
SYNC modeNTSC, PAL, EXT, UNIV, INT
Measurement subjectVertical synchronous frequency: 40 to 200Hz
Memory channels100
Analyzer functionStandard function
InterfaceUSB (Rev. 1.1) or RS-232c (38,400 bps maximum)
Operating temperature/humidity rangeTemperature: 10 to 28°C; Relative humidity 70% or less with no condensation. Luminance change: ±2% ±1 digit of reading for white; Chromaticity change: ±0.002 for white, ±0.006 for monochrome from reading of Konica Minolta's standard LCD *1, 160.0 cd/m2 at 23°C 40%RH
Storage temperature/humidity range0 to 28°C: Relative humidity 70% or less with no condensation; 28 to 40°C: Relative humidity 40% or less with no condensation
Input voltage range100 to 240V~50/60Hz, 50VA
Dimensions (W × H × D)Main body: 340 × 127 × 216mm
Probe: Φ49 × 204mm
WeightMain body: 3.58kg; Probe: 520g