You are here:Home > Color Management > Color Analyzers & Probes

CR-100 Colorimeter Rental

Rental Cost: $400.00

Renter must provide Certificate of Insurance (COI) showing Flanders Scientific as the loss payee and additionally insured.

Product Code: Rent.CR-100

Schedule rental with support@flandersscientific.com

Qty:

Description

This listing is for a 2 day rental of the Colorimetry Research CR-100 colorimeter.

The CR-100 Colorimeter

The Colorimetry Research CR-100 is a high quality colorimeter designed specifically to work with virtually any display technology. The CR-100's machined aluminum and steel housing coupled with a completely solid state design ensure excellent durability while keeping the probe incredibly compact and lightweight (just 12 ounces / 340 grams). What sets the CR-100 apart from other colorimeters are its high quality tristimulus filters. Every CR-100 goes through a strict quality control process including measurement of every tristimulus filter with a double monochromator to ensure the following performance benchmarks are attained:

	Guaranteed	Typical
Y (Photopic)	≤ 2.0%	1.4 - 1.8%
Xr (Red)	≤ 3.0%	2.3 - 2.7%
Xb (Red under Blue)	≤ 1.2%	0.8 - 1.0%
Z (Blue)	≤ 3.5%	2.2 - 2.7%

The CR-100 can be used with the CRI Application for manual measurement and logging. It is also compatible with FSI’s AutoCal, LightIllusion’s LightSpace CMS*, LightIllusion’s ColourSpace*, and Portrait Display’s CalMan allowing for full 3D LUT based calibration of Flanders Scientific monitors.

The CR-100 can be used to measure a wide variety of display technologies and utilizes the Four-Color Matrix Method to calibrate the probe for use with specific display types/spectral distributions. The Four-Color Matrix Method, developed by the National Institute of Standards and Technology (NIST), improves the accuracy of tristimulus colorimeters for measurements of color displays and has been verified to be appropriate for cathode rays tubes (CRTs), liquid crystal displays (LCDs), and organic light emitting diodes (OLED) displays. When ordering the CR-100 from Flanders Scientific the probe will be equipped with custom matrix matched selections for all current Flanders Scientific monitors in addition to any matrices provided by CRI.

*LightSpace CMS, ColourSpace, and CalMAN are sold separately.

Technical Specs

CR-100 Specifications

Wavelength Range	380 - 780 nm
Luminance Range	0.0002 fL to 1500 fL 0.0002 fL @ Signal to Noise Ratio > 10, 20 seconds exposure 0.001 fL @ Signal to Noise Ratio > 10, 0.5 second exposure 0.001 fL @ Signal to Noise Ratio > 100, 20 seconds exposure 1500 fL @ Signal to Noise Ratio > 8000, 1 second exposure
Luminance Accuracy	± 2 % @ 0.1 fL, 0.4 second exposure
Luminance Repeatability	0.2 % @ 0.1 fL, 0.4 second exposure 1.5 % @ 0.01 fL, 0.5 second exposure 1.5 % @ 0.001 fL, 20 seconds exposure
Chromaticity Accuracy	± 0.0015 x, y @ 0.1 fL, 0.4 second exposure ± 0.0015 x, y @ 0.02 fL, 20 seconds exposure
Chromaticity Repeatability	0.0005 x, y @ 0.1 fL, 0.4 second exposure 0.0005 x, y @ 0.02 fL, 20 seconds exposure
Polarization Error	≤ 0.1 %
Synchronization Frequencies	10 - 500 Hz (Custom Synchronization from 10 Hz to 10 KHz available)
Exposure Time Range	1 ms to 20 seconds
Power Requirements	5V, 120 mA (600 mW) via USB 2.0
Interface	USB 2.0, Ethernet
Weight / Mass	12oz. (0.34 Kg.)